블로그로 돌아가기
사용 방법 가이드 2026-11-20 Weldental: Water Flosser with Weltip Infuser Tip Delivers 0 조회수

Weltip H2Ofloss Tip & Tablets: Setup Guide

Weltip H2Ofloss Tip & Tablets: Setup Guide

H2Ofloss 워터 플로서용 Weltip Infuser 팁과 Weltab 정제 설정 방법을 알아보세요. 호환성 및 첫 사용 단계가 포함됩니다.

What You Need for Setup

Setting up a Weltip Compatible H2Ofloss Tip with Weltab tablets is straightforward when you know what fits and what doesn't. This guide covers the essentials from the product record: compatibility, the tip itself, and the tablets that go with it.

The Weltip Infuser Tip is designed for H2Ofloss models HF-8, HF-9, HF-6, and HF-3. It is the world's first patented Infuser Tip. The tablets, called Weltab, are SLS free and fluoride free, made with natural ingredients in the USA.

How to Set Up the Weltip Tip and Weltab Tablets

The following steps are based on the supplied product information. Always check your water flosser manual for model-specific instructions.

  1. Confirm your flosser model: The Weltip fits HF-8, HF-9, HF-6, and HF-3 H2Ofloss models. If your flosser is not one of these, the tip may not attach or seal properly.
  2. Attach the Weltip Infuser Tip: Remove your existing tip by pressing the eject button on the flosser handle. Push the Weltip firmly into the handle until it clicks into place. Gently tug to confirm it is secure.
  3. Add a Weltab tablet to the reservoir: Drop one Weltab tablet into the water reservoir before filling. The tablet is designed to dissolve and help clean the tip and flosser path. Do not use more than one tablet per fill unless your flosser manual states otherwise.
  4. Fill the reservoir with water: Fill the reservoir with room-temperature water to the indicated fill line. The tablet will begin to dissolve. Wait a moment for it to fully dissolve before using the flosser.
  5. Use the flosser as usual: Select your desired pressure setting and floss as you normally would. The Infuser Tip is designed to deliver the dissolved tablet solution through the water stream.

Product Facts for Your Setup

  • Weltip Compatible H2Ofloss Tip + Weltab Water Flosser Tablets: Weltip is the world's first patented Infuser Tip. It fits HF-8, HF-9, HF-6, and HF-3 flossers. Weltab tablets are SLS free, fluoride free, and made with natural ingredients in the USA. This confirms the tip's unique design and the tablet's clean-ingredient profile, which are the main reasons you would choose this setup over standard tips and plain water.
    Weltip Compatible H2Ofloss Tip + Weltab Water Flosser Tablets
    Weltip Compatible H2Ofloss Tip + Weltab Water Flosser Tablets

What the Supplied Information Does Not Cover

The product record does not specify how often to replace the Weltip tip or how many tablets to use per reservoir for best results. For replacement intervals, refer to your water flosser manual or the tip's packaging. For tablet dosage, start with one tablet per full reservoir and adjust based on your preference and flosser capacity.

The record also does not include cleaning or storage instructions beyond the tip being compatible with the listed models. Keep the tip dry between uses and store it away from direct sunlight to prolong its life.

관련 게시글

Customer Service
홈
상품
장바구니
내 정보