How to Clean Your Water Flosser with Weltab Tablets
By Weldental: Water Flosser with Weltip Infuser Tip Delivers | Published: 2026-10-26
Category: How-to Guides
Learn how to use Weltab Repair Tablets to clean your water flosser, remove buildup, and keep your device fresh with simple steps.
Quick Answer
Use Weltab Repair Tablets in your water flosser tank to break down mineral buildup and freshen the internal lines. Run the solution through the machine, then rinse with plain water.
Why Regular Cleaning Matters
Water flossers can harbor mineral deposits and biofilm over time, especially if you use hard water or skip drying. Regular cleaning keeps the internal tubing clear and helps the device perform consistently.
Weltab tablets are designed for use with a Weltip-equipped flosser. They dissolve into a mild solution that works through the water path, so you don't have to disassemble the unit.
What to Expect from Weltab Tablets
These tablets contain Nano-hydroxyapatite, which helps re-mineralize surfaces, and they create alkaline saliva when used as a daily rinse. For cleaning, the same mild formula helps break down residue without harsh chemicals.
The mild flavor encourages regular use, and the tablets are manufactured in Carlsbad, California. Use them twice per day for best results if you also use them for oral care.
Step-by-Step Cleaning Process
- Fill the tank with warm water: Remove the water tank and fill it with warm (not hot) water to the maximum line. Warm water helps the tablet dissolve faster and loosens residue. Avoid hot water—it can damage the tank or internal seals.
- Drop in one Weltab tablet: Place one Weltab Repair Tablet into the tank. Let it dissolve completely, which usually takes a few minutes. If you see undissolved particles, wait longer or stir gently. Do not use more than one tablet per cleaning cycle—it won't clean better and may leave residue.
- Run the solution through the flosser: Point the tip into a sink, turn on the flosser, and let the solution run through the entire tank. This flushes the internal lines and removes buildup. Make sure to run the full tank volume so every part of the water path is cleaned.
- Rinse with plain water: Refill the tank with fresh water and run it through the flosser once more to clear any remaining tablet residue. This prevents leftover solution from affecting your next use. If you notice a slight taste after rinsing, run one more plain-water cycle.
- Dry the tank and tip: Empty the tank, wipe the outside with a soft cloth, and let the tank and tip air-dry completely before reassembling. This helps prevent mold and mineral buildup. Store the flosser with the tank off to allow airflow and reduce moisture.
Product Facts
- Weltab Repair Water Flosser Tablets: Weltab Repair Tablets require a Weltip to use and contain rod-shaped Nano-hydroxyapatite that re-mineralizes. The tablets are safe for your flosser's internals and also support enamel health if you use them as a rinse.
Weltab Repair Water Flosser Tablets
